Effects of Calcium Carbonate Admixture from Common Cockle Shell (Cerastoderma edule) and Marsh Clam (Polymesoda expansa) Powder Mixture in the Properties of Concrete
Mariah A. Cruz
Nabunturan National Comprehensive High School, Nabunturan, Compostela Valley, Philippines
The most abundant mineral that I can get is calcium carbonate, which has a vital role in the society for it can be used as an alternative source of cement admixture. Even so, concretes are used in building different kinds of infrastructure as it is also common for its capabilities. But little cracks may have a big impact to an individual and to the environment. The aim of this project was to create a concrete with calcium carbonate admixture from mixed Common Cockle Shell (Cerastoderma edule) and Marsh Clam (Polymesoda expansa) and to study one of the properties of the concrete. The Cockle Shells and Marsh Clams were washed, boiled, oven-dried and homogenized. Calcium carbonate was then produced and were added to the cement mixture. The concretes with different treatments of the calcium carbonate admixture (0%, 1% and 2%) were tested for its compressive strength. Afterwards, the concrete with 1% calcium carbonate admixture has the highest compressive strength of 1988.26 psi compared to the concrete without calcium carbonate admixture with a strength of 887.89 psi.
Keywords: Calcium carbonate, Common Cockle Shell, Marsh Clam, admixture
The United States Environmental Protection Agency stated that about 13,000 non-smoking people die each year due to lung cancer that is related to radon exposure. You can’t see nor smell radon gas but it may cause some health issue for it can be exposed through cracks in concretes (WET Sealers, n.d.). A person exposed to radon gas is already exposed to constant radiation and that element settles in the lungs (Kohut, 2017).
According to the World Health Organization, “lung cancer deaths in the Philippines is numbered 8,518 in the country”. The leading cause of death in the Philippines that is cancer-related is the lung cancer with 1.59M death and 10% of this are non-smokers (Gloor, 2014). And that 10% of the people who died is exposed in radon gas.
Admixtures are utilized in concretes because it modifies and improves some properties of concrete such as its durability and workability (Nemati, 2015). In the Philippines, the admixture that they are using is the GRANDPLASTER 2023SP which contains silica fume (Grand Aces Venture Inc., n.d.). Silica fume is also harmful to our body specifically to our lungs. Limestone contains calcium carbonate (CaCO3) that can be used as admixture in concrete. But using this source until the future may lead to the loss of virgin materials.
G.K. Patel and S.Y. Deo (2016) used organic materials as admixture such as waste food grains. Because in India, 40% of the food production was wasted because of the poor transportation and the lack of storage. Further research with regards to organic materials, seashell wastes are highly available and are dumped with the absence of re-use value (Hung Mo et al., 2018).
As stated in the article of the International Plant Nutrition Institute, Limestone contains approximately 40% calcium carbonate. Seashells contain 95-99% of calcium carbonate prior to its weight (M. Mohammed et al., 2012). Thus, seashells like Marsh Clam (Polymesoda expansa) and Common Cockle Shell (Cerastoderma edule) may be an alternative admixture in concrete for it has the same component as of the mineral admixture that is used in the present.
This project aims to study the compressive strength of the concretes with two different treatments of calcium carbonate admixture compare to the compressive strength of the concrete without a dosage of calcium carbonate admixture.
MATERIALS AND METHODS
This study has three phases: Phase I – Preparation of Raw Materials, Phase II – Preparation of the Concretes, Phase III – Compressive and Flexural Strength Testing. All of the experimentations were done in Nabunturan National Comprehensive High School (NNCHS). And the testing was done in a laboratory in Panacan, Davao City.
Phase I – Preparation of Raw Materials
The Common Cockle Shell (Cerastoderma edule) and Marsh Clam (Polymesoda expansa) were collected from the public market in Nabunturan. The cockle shells and marsh clams were washed separately in water to remove the dirt. After washing, the seashells were boiled separately to let the shells open. Then, the meat of it were removed leaving the shells.
The plywood and nails were collected in a hardware store in Nabunturan. The plywood were cut in 46cm x 15cm x 15cm for the body of the mold and the rectangular prism mold were divided into 3 sections by 2 plywood with a size of 15cm x 15cm x 15cm. Following the recommendation of Ammari, Ghoraishi, Abidou and Al-Rousan (2017), the researcher made 3 molds with a standard interior size of 150mmx 150mm x 150mm.
Adopting the procedure of Mohamed, Yusup and Maitra (2012), the cockle shells and marsh clams were placed in the trays separately and underwent the process of oven-drying at 110 degrees Celsius for 2 hours. After 2 hours, both seashells were crushed using mortar and pestle. After the crushing of seashells, the researcher used a strainer to separate the powder one from the particles that has not been fully crushed. Then, the powdered cockle shells and marsh clams were stored in the crucibles.
Phase II – Preparation of the Concretes
Twenty kilograms of cement, 40kg of coarse aggregate and 80kg of fine aggregate were collected in the sand and gravel store in Nabunturan. Then, the researcher made 3 batches of cement and were mixed together with the coarse aggregate and fine aggregate with a ratio of 1:2:4 (Adewole, Ajagbe ; Arasi, 2015). After mixing, the researcher added the calcium carbonate admixture from the common cockle shells and marsh clams that have been pulverized in a ratio of 1:1. The admixture were added in different treatments (0%, 1%, 2%) prior to its weight. Then, the researcher added 4 liters of water to the mixture and it was mixed until the workability is achieved. Then, the wet cement mixture with different treatments were placed in the molds and it will be left for 24 hours to dry the cement.
The concretes that have been dried underwent the water curing process in a container filled with tap water for 28 days. After 28 days, the concretes with three different treatments were removed from the water and were left to dry.
Phase III – Compressive Strength Testing
The concrete samples were delivered to the Universal Multi-Testing Solutions Inc. in Davao City to test its compressive strength. The results were released afterwards.
Phase IV – Data Collection and Analysis
After the testing of the concrete samples with different treatments, the data were gathered. The researcher computed for its mean of each treatment and made a table to compare the difference of the 3 treatments.
Risk and Safety
Since we are dealing with cement, proper dress code when conducting the experiment is truly important. Wearing the proper dress code and the use of laboratory equipment while working inside the laboratory is a must. In case of difficulties, a help from a professional or an adult is highly recommended.
Table 1: The mean compressive strength (psi) of the mortar cubes in 1% and 2% calcium carbonate admixture
Treatment Compressive strength (psi) of the mortar cubes in three trials with the same curing age MEAN
28 days 28 days 28 days Control (0%) 920.59 791.51 951.59 887.89
CaCO3 (1%) 2303.24 1812.24 1849.30 1988.26
CaCO3 (2%) 566.14 711.08 1960.72 1079.32
Table 1 shows an increase of more than 100% in the strength when 1% calcium carbonate admixture was added in the cement compared to the negative control. Moreover, it shows a decrease of 46% in its strength when another 1% of calcium carbonate admixture was added in the cement.
According to the study of Chuan (2014), there is a decrease in the concrete’s workability and compressive strength as the amount of admixture increases. Furthermore, the concrete with 1% admixture is serviceable to have the advantage in boosting the strength. Still, if the percentage replacement of ground seashells exceed the maximum quantity will affect the density of the cement mixture resulting to a weak compressive strength in the cement. (calcium carbonate background and stuffs). Some commercial admixtures contain resin acids which has a toxic character that when its waste is exposed to the environment may be resulting to the presence of unwanted toxic effects (Togero, 2005; Mascarelli, 2012). Thus, using mineral admixture reduces the adverse effect of cement which is the carbon dioxide in the environment (Magudeaswaran, Selvam, & Gold V., 2015). The grounded calcium carbonate from Common Cockle Shell (Cerastoderma edule) and Marsh Clam (Polymesoda expansa) showed accurate results which is capable of having a source of cement admixture based in its compressive strength and its availability in high quantities.
The study evaluated the potential of ground cockle shell and marsh clam in the durability of a concrete. Based on the gathered data and results, the mortar cube with the treatment of 1% calcium carbonate admixture obtained the highest compressive strength compared to the mortar cube with 2% treatment and the negative control. Therefore I conclude that the mixture of calcium carbonate from the cockle shell and marsh clam has the capability to replace chemical admixture.
The researcher would like to recommend to conduct tests with regards to the other properties of concrete. And also do explore other materials that contains high dosage of calcium carbonate or calcium oxide which is the main ingredient of mineral admixtures.
I would like to express my deepest appreciation to the following people:
First, to God for the blessings and for the hope that you’ve given to me to strive and finish this project successfully. To Mrs. Leah R. Guirigay for giving me the chance to work on this project. For the patience, support and for your advices that motivated me. To Mrs. Candelaria Bolonos for providing the different apparatuses that I needed for my lab session. To my schoolmates, Brad Lee Tulio and Earl Roed Cabalan for lending me your manuscript as a basis and for helping me throughout this journey. To my parents, Mr. and Mrs. Martin F. Cruz Jr. for helping me on purchasing the different materials that I needed for my study and for believing me that I can do it. To my classmate, Yuanne Emmanuel Eling for helping me on mixing and making the mortar cubes. To my fellow individual, Renee Arianne Madrid for being there always to motivate me through tough times. And to the rest of my classmates and friends, for the never ending love and support. To God be the glory!
P, Magudeaswaran ; Panneer Selvam, Vaishali ; Gold. V, Vime. (2015). Incorporating Mineral Admixtures in High Performance Green Concrete. International Journal of Applied Engineering Research, 10(47), 32359-32367. Retrieved from
M. Henry, G. Pardo, T. Nishimura, and Y. Kato (September 2011). Balancing durability and environmental impact in concrete combining low-grade recycled aggregates and mineral admixtures. Resources, Conservation and Recycling, 5(11), 1060-1069. Retrieved from
Amanda Mascarelli (March 15, 2015). Environment: Toxic effects. Nature, 483, 363-385. Retrieved from
S. O. Odeyemi, M. A. Anifowose, M. O. Oyeleke, A. O. Adeyemi, S. B. Bakare. Effect of Calcium Chloride on the Compressive Strength of Concrete Produced from Three Brands of Nigerian Cement. American Journal of Civil Engineering. Special Issue: Predictive Estimation by ANSYS for Laminated Wood Deep Beam. Vol. 3, No. 2-3, 2015, pp. 1-5. Retrieved from
K. Banerjee (2016). Calcium chloride. Retrieved from
Ase Togero (2006). Leaching of Hazardous Substances from Additives and Admixtures in Concrete. Environmental Engineering Science, 23(1). Retrieved from
P. Chuan (2014). EFFECT OF SAW-DUST – SEA SHELL POWDER MIXTURE ON COMPRESSIVE STRENGTH OF CEMENT MORTAR. Retrieved from